Ipe - Diamond Decking
Ipe - Diamond Decking is one of the world's finest outdoor woods. The elegance of indoors emerges in this ultimate exterior hardwood. Ipe is 100% naturally durable and free of toxic preservatives. Rated as a Class A material by the Uniform Building Code, Ipe meets or exceeds the most stringent fire codes. It also carries the highest insect and decay resistance rating by the U.S. Forest Products Laboratory.
Ipe - Diamond Decking —it doesn't just last... it lasts beautifully!
Distinctive hardwood markings, smooth even texture and warm golden highlights combine to create the richness of teak. With minimal care, Ipe will retain it's original appearance for years.
Left to itself, Ipe naturalized to a fine silvery patina. Five times harder that pine, cedar and redwood. Ipe eliminates the scarring, wear and twisting associated with much softer woods when exposed to everyday traffic and changing weather conditions.
Amazingly strong, yet easy to work, Ipe utilization in Architectural Landscaping is limited only by your imagination. Consistency of quality and appearance throughout the wide spectrum of available dimensions affords the designer the freedom to create distinction within each particular project.
Benefits of Ipe
Natural insect and decay resistance throughout all fibers of the wood. Highest rated termite resistance.
Extremely hard and dense. Resists all types of punishment. Free of toxic preservatives.
Magnificent hardwood look. Natural variations of rich wood colors.
Little or no knots. Clear lengths up to 16' long.
Maintains rich color with minimal oiling. If left natural, turns a soft silver over time. Resistant to shrinking, splintering, twisting, cupping and checking.
Superior fastening with marine grade stainless steel screws or S.S. nails recessed into surface. Will not pull loose or pop up. No tannic acid reaction with S.S. fasteners.
Extremely strong.
Natural fire resistance rating: Class A-1 NFPA (National Forest Products Association) and UBC (Uniform Building Code).
DECK WOOD LASTING 60 YEARS?
Compare Ipe to other Domestic Woods!
|
Type of Wood |
Ipe -
Diamond Decking |
Western Red |
Redwood Softwood |
CCA Pressure Treated |
|---|---|---|---|---|
| Weight Per Cu. Foot |
69 lbs. |
30 lbs. |
28 lbs. |
35 lbs. |
|
Bending Strength |
25,360 PSI |
6,800 PSI |
7,900 PSI |
14,500 PSI |
|
Modulus of |
3,140 |
930 |
1,100 |
1,980 |
|
Hardness |
3,680 lbs. |
580 lbs. |
480 lbs. |
690 lbs. |
| Classification Codes for Ipe Code Class NFPA Class.................................... A UBC Class....................................... 1 |
Surface Burning Characteristics as per ASTM-E84 of Ipe TEST TYPE Flame Spread (10 minutes).....................................0 Flame Spread (30 minutes).....................................5 Flame Spread (10 minutes).....................................2 Smoke Developed Value (10 minutes).....................0 Fuel Contribution (10 minutes)...............................0 |
![]()


